Philips DCM230-37B - Manual (Page 25)

English
25
Compatible iPod players
●
Most Apple iPod models with 30-pin dock
connectors as follows: Nano 1st /2nd/3rd
generation, iPod 5th generation (video), iPod
touch and iPod classic.
Selecting the correct dock
adaptor
●
4 iPod dock adaptors of different type, as
indicated at the back of the adaptor, are included
to fit the following iPod:
Nano 1st /2nd/3rd generation, iPod 5th
generation (video), iPod touch and iPod classic.
Setup
●
Insert a dock adaptor corresponding to the
portable player you use.
2
1 1
●
To connect with a different iPod portable player,
pop up the corresponding dock adaptor and
replace with a new one of the matching type.
iPod Dock
Playing an iPod portable player
1
Correctly dock your iPod por table player in the
cradle. Make sure the dock adaptor is
compatible.
●
Make sure that you have powered on your iPod
player before selecting DOCK source.
➜
On the display, "iPod" is displayed if iPod is
connected.
2
Press SOURCE on the system repeatedly or
iPod on the remote control to select iPod
source.
3
Playback starts automatically. You can select
available features (such as play/pause, skip track,
fast forward/backward, menu selection) during
playback.
Charging iPod battery using the
dock
●
In DOCK mode, directly dock your iPod
portable player on the cradle for charging.
Note:
– For the purpose of SAVING POWER, recharging
of your iPod or USB device is NOT SUPPORTED
when the main set is in the STANDBY MODE.
pg001-028_DCM230_37-Eng 2010.3.31, 15:02 25