Philips DCM230-37B - Manual (Page 23)

English
23
Clock/Timer
Clock setting
The clock can be set in either 12-hour or
24-hour mode (
12HR or 24HR for example).
1
In standby mode, press PROG.
➜ SET CLOCK is displayed briefly. Then, 12HR
or
24HR is displayed.
2
Press ALBUM/PRESET +/- (or
¡ / ™ on the
remote control) to select clock mode.
➜
The clock digits for the hours continue to
flash.
3
Press ALBUM/PRESET +/- (or
¡ / ™ on the
remote control) to set the hours.
4
Press PROG again.
➜
The clock digits for the minutes flash.
5
Press ALBUM/PRESET +/- (or
¡ / ™ on the
remote control) to set the minutes.
6
Press PROG to confirm the time.
Timer setting
●
The system can be used as an alarm clock,
whereby the CD, TUNER, USB or DOCK is
switched on at a set time (one time operation).
The clock time needs to be set first before the
timer can be used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
Press TIMER for more than two seconds.
2
Press SOURCE repeatedly to select the sound
source.
➜
“
SET TIMER” and “SELECT SOURCE” are
displayed.
3
Press TIMER to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press ALBUM/PRESET +/- (or
¡ / ™ on the
remote control) to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press ALBUM/PRESET +/- (or
¡ / ™ on the
remote control) to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press TIMER
once on the remote control.
➜
Display shows if activated, and disappears if
deactivated.
TIMER
iPod
pg001-028_DCM230_37-Eng 2010.3.31, 15:02 23