Philips Norelco SensoTouch wet and dry electric razor 1190XD DualPrecision heads Jet Clean 50 min with Precision trimmer and Jet Clean system - Manual (Page 19)

ENGLISH
C
5 Pour the Jet Clean Solution into the
canister up to a level between the two
lines located inside the canister.
C
6 Carefully lower the Jet Clean System
over the canister making sure the release
buttons snap back into position.
Replacing the Shaving Unit
◗ Replace the shaving unit once a year for
optimal shaving results.
◗ Replace damaged or worn razor heads with
model RQ11 Philips Norelco razor heads only.
◗ The individual shaving heads (cutters and
combs) are NOT replaceable. Only the one-
piece shaving unit can be replaced.
36
ENGLISH
Replacement Razor Head Assembly
Indication
C
◗ After 12 months of use, the replacement head
indicator symbol starts to blink to remind you
to check if it’s time to replace your shaving
unit to obtain optimal shaving results.
Note: The displays of models 1160X, 1160XCC
and 1150X look different, but work the same way.
C
1 Pull the shaving head holder off the
bottom part of the shaving unit.
C
2 Attach the new shaving head holder to the
bottom part of the shaving unit (‘click’).
C
3 To reset the razor, press and hold the On/
Off button for approximately 10 seconds.
Note: If you do not reset the razor at the first
replacement reminder, it continues to show the
shaving unit symbol at 8 more shaves or until you
reset the razor.
This razor/charging stand/Jet Clean System has no
other user-serviceable parts. For assistance call
1-800-243-3050.
37
RQ11
3 sec. 10 sec.