Philips Norelco SensoTouch wet and dry electric razor 1190XD DualPrecision heads Jet Clean 50 min with Precision trimmer and Jet Clean system - Manual (Page 9)

17 16
ENGLISH ENGLISH
Charging in the Charging Stand
C
1 Connect the small plug of cord to charging
stand.
C
2 Unfold the charging stand. You will hear a
‘click’.
3 Connect the power plug into any 100V to
240V AC outlet. Use only the power cord
provided.
◗ An adaptor plug may be necessary for power
cord usage in some foreign countries. Use
an attachment plug adaptor of the proper
configuration for the power outlet.
The power cord will automatically convert to
work on 100V to 240V AC systems.
C
4 Place razor in stand in an upright position
(1). Press the razor back into the holder
until it locks into place (2).
5 The display on the razor will indicate razor
is charging.
6 Charging requires one full hour. A fully
charged razor has a cordless shaving
time of up to 50 minutes (models 1190X,
1180X, 1180XCC, 1160X and 1160XCC)
or 40 minutes (model 1150X).
Important
◗ Only use the power cord and charging stand
or Jet Clean System (models 1180XCC,
1160XCC) provided to charge the razor.
◗ The power plug transforms 100-240V AC to
less than 24V DC.
Charging
◗ Charging, recharging or storing at
temperatures below 40ºF or higher than 95ºF
adversely affects lifetime of batteries.
◗ Charging or recharging requires one full hour.
◗ A fully charged razor has a shaving time of
up to 50 minutes (models 1190X, 1180X,
1180XCC, 1160X and 1160XCC) or 40
minutes (model 1150X).
◗ You may recharge when the bottom charging
light blinks orange (models 1190X, 1180X,
1180XCC) or the plug symbol blinks (models
1160X, 1160XCC and 1150X).
◗ Do not charge razor in a pouch.
1 2