Philips 25PT533S-17 - Manual (Page 10)

10
VOL
AV2
CVI
AV1
24
Front
L/Mono
Monitor out
VIDEO
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
COMPONENT VIDEO INPUT
AUDIO OUT
L R S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
SVHS
1
2
3
4
5
7
6
T he S(uper)-Video connection on the rear
of the TV can provide you with better pic-
ture detail and clarity for the playback of
accessory sources such as DBS (digital
broadcast satellite), DVD (digital video
discs), video games, and S-VHS VCR (video
cassette recorder) tapes than the normal
antenna picture connections.
NOTE: The accessory device must have an
S-VIDEO OUT(put) jack in order for you to
complete the connection on this page.
1 Connect one end of the S-VIDEO
CABLE to the S-VIDEO jack on the
back of the TV.
2 Connect one end the AUDIO (red and
white) CABLES to the AV2 in AUDIO
L and R(left and right) jacks on the
rear of the TV.
3 Connect other end of the S-VIDEO
CABLE to the S-VIDEO OUT jack on
the back of the VCR.
4 Then connect the other ends of the
AUDIO (red and white) CABLES to
the AUDIO (left and right) OUT jacks
on the rear of the VCR.
5 Turn the VCR and the TV ON.
6 Press the AV button on the remote to
scroll the channels until SVHS appears
in the upper left corner of the TV
screen.
7 Now your ready to place a prerecorded
video tape in the VCR and press the
PLAY
ᮣ button on the VCR.
U
SING THE
S-V
IDEO
I
NPUT
J
ACKS
The S-VIDEO and VIDEO AV2 in(puts) are
in parallel. The S-VIDEO input is domi-
nant when in use. If separate video signals
are connected to the S-VIDEO and VIDEO
AV2 in(puts), the signal from the VIDEO
AV2 in(put) will not be usable.
Note: The S-Video and Audio cables needed
for this connection are not supplied with
your TV. Please contact your dealer or
Philips at 800-531-0039 for information
about purchasing the needed cables.
H
ELPFUL
H
INT
AUDIO CABLE
(RED/WHITE)
VCR
(EQUIPPED WITH
S-VIDEO JACKS)
S-VIDEO
CABLE
BACK OF VCR
NOTE: Repeatedly pressing the AV button on the remote control will toggle the
picture source from the current channel, then the AV1 channel (or CVI channel),
then the AV2 channel, then the S-Video (SVHS) channel, then the Front channel
(side inputs), then back to the current channel being watched.