Philips 25PT533S-17 - Manual (Page 16)

16
Y our TV can automatically set itself for
local area (or Cable TV) channels. This
makes it easy for you to select only the TV
stations in your area when the CHANNEL
(+), (–) buttons are pressed.
Note: Make sure the antenna or cable signal
connection has been completed before AUTO
PROGRAM is activated.
1 Press the MENU button on the
remote to show the on-screen menu.
2 Press the CURSOR UP
▲ or DOWN
▼ buttons to scroll through the on-
screen menu until the word INSTALL
is highlighted.
3 Press the CURSOR RIGHT ᮣ but-
ton to display the INSTALL menu
features.
4 Press CURSOR UP
▲ or DOWN ▼
buttons to scroll the Install features
until the words AUTO PROGRAM
are highlighted.
5 Press the CURSOR RIGHT ᮣ but-
ton to start the Auto Program scanning
of channels. Auto Programming will
store all available channels in the TV’s
memory then tune to the lowest avail-
able channel when done.
6 When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
H
OW TO
A
UTOMATICALLY
P
ROGRAM
C
HANNELS
When CABLE is selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-
69 are available.
When AUTO is selected, the TV will auto-
matically set itself to the correct mode
based on the type of signal it detects when
the AUTO PROGRAM feature is activated.
H
ELPFUL
H
INT
VOL
6
2
4
3
5
1
2
4
Auto Program
Channel 12
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
Install
Language
Tuner Mode
Auto Program
Channel Edit
Auto Program
Channel 13
Auto Program
Channel 14