Philips VOIP1511B-37 - Manual (Page 19)

17 Phone Settings
Make sure that Use only default devices is
ticked and click OK .
7.2.4.2 For Windows 2000 user
Click Advanced... to open Sounds and
Multimedia Properties window.
Select an audio output device under Sound
playback .
Select an audio input device under Sound
recording .
Make sure that Use only preferred devices is
ticked and click OK .
Note
It is recommended to set both audio input and
output device on your computer sound card.
Note
By ticking the box Use only default devices (for
Windows XP and Vista users) or Use only
preferred devices (for Windows 2000 user), you
will be able to separate the audio path of your
computer. Audio from Skype will be emitted at
the phone, while audio from other Windows
applications will be emitted at the selected device.
7.3 Tone Settings
Open the “VOIP151 Phone Settings” window and
select the
Tone Settings tab.
The following settings are available:
7.3.1 Change ringer melody
Select a melody under Default Melody and click
OK to apply the change.
Note
If your phone is connected to the computer, you
can click
Listen to hear the melody.
7.3.2 Change ringer volume
Select a volume level under Default Volume and
click OK to apply the change. When the bar is
moved to Off , the ringer is disabled.
7.3.3 Key Tone Settings
Tick on the Disable Key Tone box under Key
Tone Settings to put the key tone to OFF. To
activate the key tone, untick the box.
4
1
2
3
4