3 remove the base assembly for vesa mounting – Philips 241S4LSB-27 User Manual
Page 11
Advertising
9
2. Setting up the monitor
2.3 Remove the Base Assembly for
VESA Mounting
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
241S4L
1.
Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. 8VHDÁDWKHDGVFUHZGULYHUWRUHPRYHIRXU
mylars from the hinge cover.
3. Remove the screws from hinge cover.
4. Remove the base assembly.
241S4LC
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
Advertising
This manual is related to the following products: