Philips 298P4QJEB-00 - Manual (Page 52)

50
8. Troubleshooting & FAQs
8.4 Daisy Chain FAQs
Q1: Which graphic cards can support
Daisy Chain?
Ans.: With Daisy chain function, AMD graphic
card HD6850 or above is required. For
other brand graphic cards, please check
your graphics card vendor for the latest
DisplayPort daisy chain driver support.
Q2: Does DP cable have to be v1.2 instead
of v1.1?
Ans.: For daisy chaining, the DisplayPort 1.2
cable must be used for better data
transmission.
Q3: How many displays can be daisy-
chained at the same time?
Ans.: It depends on your graphic card, please
consult your graphic card vender.
8.5 Multiview FAQs
Q1: Why I cannot activate PiP or PbP
when the sources are DVI and HDMI?
Ans.: Please refer to below table for the main
source and its supporting sub source.
SUB SOURCE POSSIBILITY (xl)
Inputs VGA DP DVI HDMI
1
HDMI
2
MAIN
SOURCE
(xl)
VGA ● ● ● ●
DP ● ● ● ●
DVI ● ●
HDMI 1 ● ●
HDMI 2 ● ●
Q2: Can I enlarge the PiP sub window ?
Ans.: Yes, there are 3 sizes to select: [Small],
[Middle], [Large]. You can press to
enter OSD menu. Select your preferred
[PiP Size] option from the [PiP / PbP]
main menu.
Q3: How to listen to Audio, independent
of video?
Ans.: Normally the audio source is linked to
the main picture source. If you want to
change audio-source input (for example:
listen to your MP3 player independently
regardless of the video source input),
you can press to enter OSD menu.
Select your preferred [Audio Source]
option from the [Audio] main menu.
Please note that the next time you
turn on your monitor, the monitor will
by default select the audio source you
chose last time. In case you want to
change it again, you need to go through
the above steps to select your new
preferred audio source, which then will
become the “default” mode.


 

 