Hale CAFS Attack - Manual (Page 57)

57 CAFS Bottled-Air Operator/s Guide
p/n: 029-0020-85-0
Ro u tine M ain te n an ce
❑
6 Routine maintenance
6.1 MAINTENANCE PROCEDURES
After each use
❑ Inspect wiring, hoses, flow sensors and connections for tightness, cor-
rosion, leaks and/or damage. (See Section 4, heading 4.7 “Plumbing,”
on page 31.) Also see Section 4, heading “Electrical” on page 38.
❑ Verify status of the CAFSAttack air filter element. See heading 6.2
“Replace Filter Element” on page 58.
❑ Clean inspect the CAFSAttack system for after each use.
❑ Verify status (charge) of the air-bottle cylinders. (See Section 2, head-
ing “Intelli-Tank Air Level Indicator,” on page 22.). Refill as needed.
(See Section 2, heading “Air Bottle FILL Coupling,” on page 22.)
❑ Flush the foam pump if a non-approved foam concentrate is used.
Also see “Appendix B: Foam Concentrate Compatibility” on page 61.
❑ See your specific FoamLogix manual, provided with the system, for
additional maintenance procedures.
Monthly
❑ See your specific FoamLogix manual, provided with the system, for
maintenance procedures.
❑ Verify air flow calibration. (See Section 5 “Preset calibration,” on page
51.)
❑ Visually and functionally inspect the CAFSAttack system for leaks and
proper system operation.
❑ Ensure that all shut-off valves and switches function properly.
Every Two (2) Months
❑ See your specific FoamLogix manual, provided with the system, for
maintenance procedures.