Fluid Management NSC80 Harbil - Manual (Page 10)

Fluid na nt 10
ASSEMBLY & INSTALLATION
Connect the 115 volt models only to a 115 volt outlet rated at at least 15
ampere. Connect the 220 volt models only to a 220 volt outlet rated at at
least 15 ampere. The equipment requires a single, grounded outlet.
EXTENSION CORDS
Extension cords for 220 VAC models are not recommended. If an extension
cord is to be used, it should not be combined with others. Use only a 3-wire
extension cord that has a 3-pole grounding plug. Power should be provided
by a 3-pole receptacle that will accept the plug on the product. Make sure
that your extension cord is in good condition. It must have # 16 AWG
conductors up to 25 feet long. An extension cord 25 feet long, but no longer
than 50 feet is permissible provided it has conductors of at least # 12 AWG.
It must be heavy enough to carry the current your product will draw. An
undersized cord can cause a drop in line voltage resulting in loss of power,
overheating and damage to the motor.
Under no circumstances should you modify the plug if it does not fit the
outlet.
Check with a qualified electrician or serviceman if you are not sure how to
ground this machine.
DISTANCE 25
ft
50
ft
100
ft
150
ft
200
ft
250
ft
300
ft
400
ft
500
ft
GAUGE
SIZE
220V
14 14 12 10 10 8 8 6 6
GAUGE
SIZE
115V
14 12 8 6 6 4 4 2 2