Canister covers and nozzle caps, Important, Agitating the colorants – Fluid Management Dual-Pump Harbil User Manual

Page 10: The canister covers should, Kept on the canisters at all times to minimize the, Evaporation and drying of the colorant, And then replaced every night, Dispenser normally

Advertising
background image

17

8

knob each morning. Dispensers equipped with motorized agitation should be

1

4390000

Agitator, Rod Assembly Complete.192 oz.

1

run for a given period of time each morning (approximately fifteen to thirty

1

4390001

Agitator Rod

&

Blade Only.192 oz.

1

minutes). The actual amount of agitation time can be determined by your

2

4390003

Guide.Agitator.192 oz.

1

3

4000063

Pin.RoD.118 x 3/4

• SS

1

experience with the colorants. It is recommended that if a colorant in a

4

4000008

Knob, Black, #25.5/16-24 TH

1

particular canister has not been dispensed for some time, the operator dispense the full

5

4000053

Nut, Hex, 5/16-24 Jam, C/Z

3

measure into an empty receptacle and then pour it back into the canister.

6

4225110

Bushing, Pump Tube, 1 oz., U.S.

1

6

4225120

Bushing, Pump Tube, 1 oz., Metric

1

6

4225130

Bushing, Pump Tube, 1 oz., Imp.

1

7

4228102

Gauge Indicator, 1 oz., DP w/ Socket Set Screw

1

CANISTER COVERS AND NOZZLE CAPS

8

4226-

Gauge Assembly Complete.1 oz.

1

9

42291-

Scale Only.Gauge.1 oz.

1

10

4221110

Pump, Tube Only. 1 oz., U.S.

1

10

4221120

Pump Tube Only.1 oz., Metric

1

IMPORTANT:

10

4221130

Pump Tube Only.1 oz., Imp.

1

11

4222110

Piston Rod Assembly.1 oz., U.S.

1

The canister covers should

be

kept on the canisters at all times to minimize the

11

4222120

Piston Rod Assembly.1 oz., Metric

1

evaporation and drying of the colorant.

11

4222130

Piston Rod Assembly.1 oz., Imp.

1

4222100

Piston Rod Only.1

&

2 oz.

1

12

4228103

Sleeve, Pump Gauge, 1 oz.

1

Nozzle caps are provided for the dispense nozzle to help prevent drying of the

14

4223110

Piston, Teflon. 1 oz., Flat, U.S.

3

colorant and they should be removed every morning before using the dispenser

14

4223120

Piston, Teflon, 1 oz., Flat, Metric

3

and then replaced every night.

14

4223130

Piston.Teflon.1 oz., Flat, Imp.

3

15

4224110

Spacer, Piston, 1 oz., U.S.

4

15

4224120

Spacer, Piston, 1 oz., Metric

4

15

4224130

Spacer, Piston, 1 oz. Imp.

4

16

4000052

Washer, Fiber, 3/16 x 1/2 x .031

1

17

4228100

Gasket, Pump Tube, 1 oz.

1

18

4000026

Screw, THCS, 10-32 x 3/8", Slot, SS

1

19

4000056

Washer, Rubber, 1/4 x 1/2

3

20

4000001

Screw, HHCS, 1/4-20 x 1/2" C/Z

3

GENERAL INSTRUCTIONS

PUMP 192 OZ. DUAL CANISTER PUMP ASSEMBLY


5. AGITATING THE COLORANTS

Different colorants may require more or less agitation. The manual agitation

ITEM

PART NO.

DESCRIPTION

NO.REO.

dispenser normally

will

require only about ten to fifteen turns of the agitator












6.

Advertising