Fluid Management Dual-Pump Harbil - Manual (Page 11)

9
I \
DUAL PUMP 192 OZ. CANISTER
PUMP ASSEMBLY
PROCEDURE FOR USING THE
HARBIL DUAL PUMP COLOR DISPENSER
1. Determine the formula of the color selected by the customer.
2. Refer to the formula book and select the proper base paint, remove the lid and
place the can in position on the dispensing shelf of the machine.
A. On the "in-line" model position the paint can under the first colorant
canister required by the formula.
B. On the "turntable" model place the paint can in position in front of the
turntable, depress the index lever and move the first colorant canister
required by the formula into position over the paint can.
3. Adjust the pump gauge to the scale setting shown in the formula book and
dispense the colorant (as described in GENERAL INSTRUCTIONS-
Section 4, MEASURING AND DISPENSING THE COLORANT on pages 5
and 6).
4. If more than one stroke or scale setting is required, repeat step 3.
5. If more than one colorant is required, repeat steps 2, 3 and 4.
6. After all of the colorant is added, replace the lid and mix the can in a paint
mixer for the required time period, or stir thoroughly and then replace the lid,
to insure complete mixing of the colorants.
16