Fluid Management VR-1 Mixer - Manual (Page 6)


Fluid Management Customer Service 1.800.462.2466 V-Series | 5
Important Safety Information
Information and Instruction Labels
You should become familiar with the information labels affixed to the machine, as
well as the warnings, cautions, and notes which appear throughout this guide. Read
all the warning labels on the exterior and interior of the mixer. If the labels become
damaged or unreadable, you may purchase replacements from Fluid Management
Customer Service.
Safety Notice Information
The two main notices used in this guide and on the V-Series Mixer are Warning and
Caution.
WARNING:
Unplug before
servicing
WARNING
HAZARDOUS
ELECTRICAL
COMPONENTS
CAUTION
POTENTIAL
SAFETY
HAZARD
A Warning notice tells you about a hazard that could
cause serious injury to you or extensive damage to the
equipment. This information is featured in the beginning
of the guide to emphasize safety. When you see a
Warning notice in this guide, read it carefully before
continuing with the operation of the machine. Take all
necessary precautions to avoid potential injury.
A Caution notice tells you about a danger that could
cause injury to you or minor damage to the mixer. When
you see a Caution notice in this guide, read it carefully
and be sure you understand it before continuing.
Use a dedicated
15 amp circuit
(US & Latin
America only)
WARNING:
DO NOT use with or
near flammables
General Safety Information
DO NOT attempt to service a product yourself unless instructed to do so by Fluid
Management Customer Service. Use only a Fluid Management Authorized Service
Technician to repair your equipment. Please note that some parts can be upgraded
or replaced by the customer. Fluid Management identifies those parts as such and
provides documentation with instructions when it is appropriate for customers to
replace those parts. You must closely follow all instructions when performing such
replacements. ALWAYS make sure that the power is turned off and the machine is
unplugged before you attempt the replacement
. If you have any questions or concerns,
contact Fluid Management Customer Service.