Gradall 534B (9020-7317) Service Manual - Manual (Page 158)

CHECK POINTS “F” & “G” ARE FOR INITIAL CIRCUIT
CHECKING ONLY. THESE FITTINGS SHOULD BE PRO-
VIDED ON THE PROTOTYPE MACHINE.
CHECK POINT “F” C
OUTLET PRESSURE.
CHECK POINT “G” COOLER
OUTLET TEMPERATURE.
.75 I.D. MIN. HOSE
TO COOLER
CHECK POINT “D”
CONVERTER OUT TEMPERATURE
(SEE SPECIFICATION PAGE)
CHECK POINT “C”
CONVERTER OUT PRESSURE
(SEE SPECIFICATION PAGE)
18000 PLUMBING DIAGRAM
2 AND 3 SPEED INLINE
COOLER
CHECK POINT “B”
CONVERTER INLET PRESSURE
.75 LINE SIZE
OPTIONAL REMOTE
MOUNTED FILTER.
18000 PLUMBING DIAGRAM
2 AND 3 SPEED INLINE
(WITH REMOTE FILTER)
1-1/16-12 THD’S FOR
STANDARD SAE
“0” RING FITTINGS
(INLET & OUTLET)
Figure H