JLG Telehandler Personnel Work Platform - Manual (Page 22)

Section 2 - Pre-Operation and Inspection
2-2 31200160
2.2 SAFETY DECALS - JLG SUPPLIED PERSONNEL WORK
PLATFORM
Ensure all DANGER, WARNING, CAUTION and instructional decals and proper
capacity charts are legible and in place. Clean and replace as required.
Quick Switch Mounted
Before S/N 2006058-01
OAB0120
1704277 B
1704277
90553032
ATTACH LANYARD HERE
9055-3032
90553026 90553031 90553033
406 MILL AVE. S.W. NEW PHILADELPHIA, OHIO MADE IN U. S. A.
DO NOT USE PERSONNEL WORK PLATFORM WITHOUT THE PROPER GRADALL MATERIAL HANDLER/PERSONNEL WORK PLATFORM CAPACITY CHART DISPLAYED IN CAB.
9055-3033
ATTACHMENT
SERIAL NUMBER
WEIGHT
CAPACITY
HYD. PRESSURE
9055-3026 REV. A
READ AND UNDERSTAND THE FOLLOWING PRIOR TO LIFTING PERSONNEL.
WHEN LIFTING PERSONNEL USE ONLY A GRADALL MANUFACTURED
PERSONNEL WORK PLATFORM.
ALL PERSONNEL IN PLATFORM MUST WEAR A FULL BODY HARNESS WITH
LANYARD ATTACHED TO A DESIGNATED ANCHORAGE POINT.
READ AND UNDERSTAND PERSONNEL WORK PLATFORM USER'S MANUAL
BEFORE OCCUPYING PERSONNEL WORK PLATFORM.
FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY OR DEATH.
4-RIGHT 4-RIGHT
9055-3031 REV. A
MAXIMUM OCCUPANCY THREE (3) PEOPLE.
DO NOT USE PERSONNEL WORK PLATFORM
WITHOUT THE PROPER GRADALL MATERIAL
HANDLER/PERSONNEL WORK PLATFORM
CAPACITY CHART DISPLAYED IN CAB.
FAILURE TO COMPLY COULD RESULT IN
SERIOUS INJURY OR DEATH.
VIEW OF LANYARD
ANCHORAGE POINT
BEFORE S/N 2005108-01
SIDE VIEW
OF PLATFORM
S/N 2005108-01 & AFTER