JLG Telehandler Personnel Work Platform - Manual (Page 25)

Section 2 - Pre-Operation and Inspection
2-5 31200160
2.3 WALK-AROUND INSPECTION
Begin your platform walk-around inspection at item 1, as noted below. Continue
checking each item in sequence.
INSPECTION NOTE: On all components, make sure there are no loose or missing
parts, that they are securely fastened and no visible leaks or excessive wear exists
in addition to any other criteria mentioned. Inspect all structural members including
attachment and railing for cracks, excessive corrosion and other damage.
1. Platform -
• Properly installed, see “Platform Installation” on page 4-3.
• Rail connections properly secure, undamaged and no missing hardware.
• Applicable Operation & Safety Manual located in manual holder.
2. Platform Gate - Clean, undamaged and closes properly.
3. Platform Support (Quick Switch Mounted Personnel Work Platform) - See
Inspection Note.
2 3
4-RIGHT 4-RIGHT
1
OAB0080