JLG Telehandler Personnel Work Platform - Manual (Page 32)

Section 4 - Types of Personnel Work Platforms
4-2 31200160
4.2 UNAPPROVED PERSONNEL WORK PLATFORMS
Do not attach any type of personnel work platform that is not manufactured by JLG
to the Quick Switch.
Do not use fork mounted personnel work platforms that do not meet the design
requirements. See “Fork Mounted” on page 4-1.
Do not use unapproved platforms for the following reasons:
• Range and capacity limitations for “will fit,” homemade, altered, or other
non-approved platforms cannot be established.
• An overextended or overloaded telehandler can tip over with little or no warning
and cause serious injury or death to the operator and/or those working nearby.
• The ability of a non-approved platform to perform its intended function safely
cannot be assured.
WARNING
Use only approved personnel work platforms. Platforms which have not been
approved for use with your telehandler could cause machine damage or an
accident.