JLG Telehandler Personnel Work Platform - Manual (Page 34)

Section 4 - Types of Personnel Work Platforms
4-4 31200160
• Attachment pin engaged in platform pin recess. Lock pin engaged fully and
secured with retainer pin. Saddles swung down and pinned in place.
Fork Mounted
JLG fork mounted personnel work platforms must attach to the forks by installing a
pin behind the heel of each fork. Prior to use, ensure each pin is installed and
secured.
For fork mounted platforms not manufactured by JLG, follow the personnel work
platform manufacturer’s instructions for installation.
DO NOT use fork mounted personnel work platforms with attachments capable of
independent motion (i.e. side tilt, swing and mast carriages) without disabling the
independent motion feature(s).
OAB0150
G-SERIES
C-SERIES &
D-SERIES