Normal engine operation, Shut-down procedure, Normal engine operation -4 shut-down procedure -4 – JLG 544D-10 Operator Manual User Manual

Page 54

Advertising
background image

Section 4 - Operation

4-4

31200172

Normal Engine Operation

• Observe instrument panel frequently to be sure all engine systems are

functioning properly.

• Be alert for unusual noises or vibration. When an unusual condition is

noticed, park machine in safe position and perform shut-down procedure. See
Shut-Down Procedure. Report condition to your supervisor or maintenance
personnel.

• Avoid prolonged idling. If the engine is not being used, turn it off.

Shut-Down Procedure

When parking the telehandler, park in a safe location on flat level ground and away
from other equipment and/or traffic lanes.

1. Apply the park brake.

2. Shift the transmission to “Neutral.”

3. Lower forks or attachment to the ground.

4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.

5. Shut off engine and remove ignition key.

6. Exit telehandler properly.

7. Block wheels (if necessary).

Advertising