JLG 544D-10 Operator Manual - Manual (Page 81)

Section 5 - Attachments
5-19 31200172
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt lever (2) controls the carriage tilt.
• Move lever back to tilt up.
• Move lever forward to tilt down.
Installation Procedure:
Refer to “Attachment Installation” on page 5-11.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.