ARB RD145 - Manual (Page 11)

3 Installing the Air Locker
9
Apply a thin film of high pressure grease to the ring gear diameter
of the flange cap and install the flange cap into the ring gear.
Apply a thread locking compound to the thread of each ring gear
bolt before inserting into the Air Locker.
Install the nuts and tighten the ring gear bolts in a star pattern with
a torque wrench according to your vehicle manufacturer’s specified
torque (Figure 3.). The nuts will be held captive by the machined
face on the case (Figure 4.).
Figure 3.
Figure 4.