ARB 3450060 User Manual
Warning
27-8-99
Page 1 of 5
3782476
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA: (08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
ARB JEEP GRAND CHEROKEE WINCH BULL BAR (1996)
No 3450060
WARNING
FOR VEHICLES EQUIPPED WITH SRS AIRBAG
WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT
PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG.
TAKE NOTE OF THE FOLLOWING:
• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE
HARDWARE SUPPLIED.
• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED
BY ARB.
• DO NOT REMOVE LABELS FROM THIS BULL BAR.
• THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.
FITTING KIT No 6171158
3751564
1 CONTROL BOX BRKT
3751584
1 NUMBER PLATE BRKT
3751585L/R
1 pr CAPTIVE NUT ANGLE BRKT ASSY. (L & R)
3193508L/R
1 pr CHASSIS MOUNT CAP. NUT PLATE ASSY. (L & R)
3751578L/R
1 pr CHASSIS MOUNTING BRKT. (L & R)
3193507
1 CHARCOAL CANISTER PROTECTION PLATE
3500080
1 INDICATOR LIGHT KIT
6151046
8 WASHER FLAT 6mmZP
4581040
8 WASHER FLAT 3/8” X 1" 16G
4581044
4 WASHER FLAT M8 X 17 X 1.2
4581048
8 WASHER SPRING M10 1/8 X 1/8
4581049
16 WASHER FLAT 1/2” X 1 1/8" 12G
4581050
10 WASHER SPRING 1/2” X 1/8 X 1/8"
4581051
4 WASHER 5/8” X 1 3/8" X 10G
6151017
8 BOLT M6 X 1.0 X 16mm
6151021
4 BOLT M8 X 1.25 X 20mm
6151074
2 BOLT 3/8” X 1 3/4" UNC
6151232
4 BOLT M10 X 1.5 X 30mm
6151094
6 BOLT M12 X 1.25 X 30mm
6151100
4 BOLT ½” X 1 1/2" UNC
6151110
2 BOLT 5/8” X 6" UNC
6151128
8 NUT FLANGE M6 X 1.0
6151132
4 NUT FLANGE M8 X 1.25
6151135
6 NUT M12 X 1.25
6151140
2 NUT 5/8" UNC NYLOC
EG50
1 RUBBER GROMMET
TOOLS REQUIRED
Basic Tool Kit, 1/2” Drill, 1/2” & 8mm drill bits