ARB 5611210 User Manual
Page 8
Advertising
08-10-09
Page 8 of 19
3783146
17. Make sure when plug is connected to
vehicle that wire is cable tied well clear of
muffler and exhaust components that may
melt it.
18. If a wheel carrier or jerry can carrier is not
to be fitted a cover panel must be fitted.
Refer to fitting instructions supplied in
cover panel fitting kit for fitment of
cover panel.
FITTING REAR BAR TO VEHICLE
19. Fit 8mm cage nuts to wing brace nut
plate and insert into LHS of vehicle and
align with rear holes in side of chassis
If cover panels are to be fitted
they must be fitted to the bar
before it is fitted to the vehicle.
Advertising