Steele Products SP-GG200D - Manual (Page 18)

18
2000W Generator
O
Oil Fill Cap/Dipstick
Upper Limit
Lower Limit
Spark Plug &
Oil Fill
Access Panel
2) Make sure generator has fuel before you start.
3) Turn the fuel valve to the “ON” position
1) Make sure generator has oil before you start. (see illustration below)
STARTING THE GENERATOR
4) Pull the choke out to the “START” position.
6) Push in the choke to the “RUN” position. 5) Pull the pull start until you feel some tension,
then pull swiftly until generator starts.