3 appendix, 1 specifications, 2 faq – AKiTiO NT2 U3e User Manual
Page 8
NT2 U3e Appendix
[7]
3 Appendix
3.1 Specifications
Application
•
3.5” SATA-I, SATA-II or SATA-III hard drives
•
1.5Gb/s or 3.0Gb/s
•
80GB - 3TB
Interface/Ports
•
USB 3.0 SuperSpeed
•
eSATA
Data Transfer
•
USB 3.0 up to 5Gbps (625MB/s)
•
USB 2.0 up to 480Mbps (60MB/s)
•
eSATA up to 3Gbps (300MB/s)
System Requirements
•
PC: Windows Vista or Windows 7
•
Mac: Mac OS 10.4 or above
•
Your hardware device must have the correct corresponding port
and driver (e.g. USB 3.0, USB 2.0 or PCI card)
Operating Environment • Temperature: 5°C ~ 40°C
•
Humidity: 20%RH ~ 80%RH
Storage Environment
•
Temperature: -20°C ~ 70°C
•
Humidity: 10%RH ~ 90%RH
Power Supply
•
Input: AC 100-240V
•
Output: DC +12V/3A
Product Size
•
17.7cm x 12.3cm x 8.1cm
•
7in x 4.8in x 3.2in
3.2 FAQ
Q: Can I connect this device to a USB 2.0 host?
A: Yes, this device is backwards compatible with USB 2.0.
Q: What file system should I choose to format my drive?
A: This will depend on how you want to use the drive but in general, we recommend:
•
Windows Vista/7 NTFS
•
Mac OS X HFS+ (Mac OS Extended)
•
To use it on both PC and Mac FAT32 (single file size is limited to 4GB)
Q: How many drives can fail before I lose my data?
A: For RAID 0, any drive failure will result in the data being lost. For RAID 1, more than one drive
failure at the same time will mean the data can not be recovered anymore. For Non-RAID, only the
data on the defective drive will be lost.
© Copyright 2012 by AKiTiO - All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. AKiTiO assumes no responsibility for
any errors contained in this manual. AKiTiO reserves the right to make changes in the specifications and/or design of this
product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are
using and are there for illustration purposes only. AKiTiO assumes no responsibility for any differences between the
product mentioned in this manual and the product you may have.