L.B. White 200 Norseman - Manual (Page 9)

TABS
ELECTRODE LEAD
HOLE IN
BAFFLE
BURNER HOLD
DOWN BOLT
HOSE
REGULATOR
PROPANE GAS SUPPLY
CONTAINER VALVE
TO
HEA
TER
8
HOSE AND REGULATOR ASSEMBLY
1. Always use approved pipe thread compound suitable
for use with propane gas or natural gas on the
threaded connections.
2. Assemble the components together according to the
figure and tighten all connections securely.
FIG. 2
BURNER AND IGNITER ASSEMBLY
1. Remove hex bolt from underside of burner.
2. Position pre-assembled burner and gas control into
case assembly of heater:
a. Locate burner head between tabs in base.
b. Align burner mounting holes in base and baffle
with tapped hole in burner casting.
3. Fasten burner to base using bolt removed in Step 1.
Tighten securely.
4. Connect electrode lead to igniter terminal.
FIG. 1