Fast & Fluid SK450 User Manual
Page 11
p11
Fast & Fluid Management - SK450
Step 4 - Place the machine in its final operational position
>
>
Lower the adjustable feet far
enough to lift the machine off
its wheels.
Take care to correctly level
the machine (by turning the
adjustable feet).
Lock all adjustable feet by
tightening the their separate
bolts.
Tip: before locking the adjustable feet, start a mixing cycle with a small
load (<5kg). While the SK450 runs, check if all four feet are firmly in
contact with the floor and then lock them.
Step 5 - Electrical connection
>
Connect the power cable to
the socket at the rear of the
machine.
Ensure the emergency stop is
unlocked (turn clockwise).
Attention! To prevent damage, the SK450 may only be connected to
either 220V/16A/50Hz or 110V/25A/60Hz/50Hz power grids.