Fast & Fluid SK450 - Manual (Page 14)

p14
Fast & Fluid Management - SK450
B - Operating the SK450
Step 1 - Place can, choose program and start program
> >
Place the container in the can
table center, place filler disc
and attach hook to container
handle. Close door. If your SK450 is
fitted with an electric door,
skip this step as it will close
automatically later. Choose correct program and
press desired timing button.
Clamping and mixing will now
start.
Attention! The mixing program will not start unless the door is closed.
Step 2 - Program ends or is interrupted, remove can
> >
To interrupt the mixing
program, press the stop
button. Use the emergency
stop only in case of calamity. W hen the program finishes or
is interrupted with the stop
button, the SK450 will
unclamp automatically. Open door and remove
container. If your SK450 is
fitted with an electric door, it
will open automatically.
Attention! Only use the emergency stop button in case of a true
emergency. After pressing the emergency stop, wait at least 15 seconds
before unlocking it (turn clockwise). The SK450 will then reset and
unclamp the container.