Fast & Fluid TMHC PC - Manual (Page 4)

p4
© Fast & Fluid Management, TMHC manual
Introduction & warranty
Introduction
By selecting a Fast & Fluid Management Dispenser you have opted for a product which is the result of
intensive research. Top-quality components, c raftsmanship and a modern ergonomic design all serve to
guarantee a long service life and a high degree of user friendliness.
The machine complies with Council Directives 89/392/EEC on machines, 89/336/EEC on electromagnetic
compatibility, and 73/32/EEC on electrical equipment intended for use within given voltage lim its, as
enacted by the Council of Ministers of the European Com munity. The machine is furnished with a CE mark.
Warranty conditions
In these warranty conditions, 'F&FM' is understood to mean Fast & Fluid Management. The warranty
conditions incorporated into F&FM's general conditions of sale are sum marized as follows (for free general
conditions you can contact F&FM):
F&FM guarantees the proper operation of any goods which it supplies, for a period of one year, except
where a breakdown is the result of normal wear and tear. The cost of any inspection activities carried out by
F&FM, with the aim of establishing whether or not a breakdown is covered by the warranty will be
reimbursed by the other party if it transpires that the breakdown is not covered by the warranty. If it
transpires that a breakdown is covered by the warranty then F&FM will supply identic al or equivalent goods
under the conditions referred to in point 6 of the general conditions of sale. The warranty obligation
described in this article only applies if the goods supplied by F&FM have been used in ac c ordance with the
manual. Time spent on warranty-related activities, inc luding travel time, travel costs and ac c ommodation
costs, are charged at current rates.
In contrast to the above, F&FM will not be held to any warranty obligation if:
1.
Repairs have been carried out, or attempted, by the other party or a third party, unless F&FM had
previously declined to repair the goods for a fair pric e;
2. F&FM demonstrates that the defect did not em erge during testing;
3. The other party fails to inform F&FM of the defect immediately, if possible either by letter and/or by fax,
providing full, accurate details and/or has failed to c omply fully with F&FM's instruc tions;
4. The other party has failed to use or treat the goods properly or in accordance with F&FM's instructions;
5. The damage has been caused by incidents, beyond F&FM's supervision, whic h have occ urred either
during transport or installation.
In the following text, the expression "Software" will be understood to mean the standard c omputer software
supplied by F&FM to the other party, recorded on a c omputer-readable storage medium, plus the
accompanying documentation (Software Manual) and inc luding any improved and/or new versions supplied.
The expression "processing unit" (PU) is understood to mean the machine for which and with which the
Software is supplied, and which is the sole machine on which the Software may be used.
The other party is authorized to copy the Software either in its entirety, or in part, (up to a m aximum of 2
copies) for purposes of internal security. These copies will be furnished with the sam e marks, designations
relating to copyright and other registration numbers as the original version of the Software.
The other party will neither amend, translate, decompile nor adapt the Software, nor convert it into sourc e
code, without specific written permission from F&FM. If the other party so requests, F&FM will provide that
party with the information required to render the Software interoperable with other software.