Fast & Fluid TMHC PC - Manual (Page 8)

p8
© Fast & Fluid Management, TMHC manual
Installation
A -Installing the dispenser
Step 1 - Unpack the machine
> >
Place the skid near the place
of installation.
Remove the c ardboard box. Remove the plastic foil
around the machine. Remove skid brackets. There
are 4 of them (1 on each
corner).
>
Remove the brackets
between the dispenser and
the cabinet. There are 4 of
them ( 1 one each corner). Remove the foam that is
located in the dispense bay
and on top of the turntable.
Access this by opening the
door and top panel.
Be careful not to damage the body and surfaces of your TMHC with any
tools while unpacking it.