Fuel suction line for the raptor – PureFlow AirDog RP-150 - Dodge Cummins 2005-2013 User Manual
Page 11
11
Raptor™ 100 & 150
2005
– Present Dodge Cummins
Section 5B Fuel Lines
Fuel Suction Line for the Raptor.
5B-1. Insert the quick connect end (see figure 11) of the “Suction Hose
Assembly” to the male fitting install in the fuel “IN” port during
step 4-1 of this manual. A “click” will be heard when the fitting
is properly connected.
Figure 11
female
5B-2.
Refer to the installation instructions within the Fuel Module Upgrade Kit. Install the
Fuel Module Upgrade Kit.
5B-3. Attach the female quick connect end of the “Suction Hose Assembly” to the bulk head
male quick connect installed during the fuel module upgrade. (see Fig 12). A “click”
will be heard when the fitting is properly connected.
Figure 12
NOTE: Figure 22 is for visual reference only. The fuel module in your vehicle may appear
different.
5B-4
Any excess fuel hose can be addressed by routing the house in a fashion to take up the
extra length, or a section of the hose can be removed. Push lock splices have been
included if you choose to remove the excess hose.
.