Rock-Slide Engineering Step Slider Door Delete Kit - Manual (Page 4)

INSTALLATION INSTRUCTION RSEI 132
9. Plug the connector ends of the door delete wires into the button
10. Reinstall the plastics, making sure all the wires are tucked out of the way
11. Repeat process for additional doors
12. Turn Step Sliders back on. With doors open, the door delete button should deploy and
retract the steps at the push of the button
13. When you put your doors back, the button must be in the correct position to allow the
door sensors to work. If nothing happens when you open/close your door, push the
button and try again
Thank you for choosing Rock-Slide Engineering products. We value your business and welcome
your feedback/suggestions. If you have any concerns please contact us directly @ 435-752-
4580. We are here to help you!