J.P. Instruments EDM 760 Pilots Guide User Manual
Page 5
Section 1 - Introduction
Product Features
EDM-760 Standard Instrument:
•
Hands-free, automatic scanning
•
Bar graph
•
LeanFind
mode
•
Battery voltage
•
Normalize view
•
DIF low to high EGT spread
•
Shows largest EGT variance
•
Oil temperature option
•
EGTs to 1°F resolution
•
Shock cooling monitoring
•
Outside air temperature (OAT)
option
•
User selectable index rate
•
Alarm “red line” limits
•
Fast response probes
•
Real-time serial data port
Fuel Flow Option:
•
Solid-state pulse generating rotor
fuel flow transducer
•
Fuel quantity measured in gallons,
kilograms, liters, or pounds
•
Low fuel quantity alarm
•
Low fuel time alarm
•
GPS interface
•
Instantaneous fuel flow rate,
•
Total amount of fuel consumed,
•
Total fuel remaining, and
•
Time to empty at the current fuel
flow rate.
Long Term Memory:
•
Records and stores data every 2 to
500 seconds
•
Non-volatile memory
•
Post-flight data retrieval
•
Data retrieval software
•
17 hours data capacity at 6 second
sample rate
Engine Data Management
The EDM-760 Engine Data Management system is the most advanced
and accurate piston engine monitoring instrument on the market. Using the
latest microprocessor technology, the EDM-760 will monitor up to
twenty-four critical measurements in your engines, three times a second,
with a linearized thermocouple accuracy of better than 0.1 percent or 2°F.
As your built-in flight engineer, the EDM-760 is constantly “red line”
checking: all critical measurements are automatically checked several
times a second, regardless of the current display status. Leaning is
accomplished quickly and automatically using the LeanFind
procedure.