AEM 30-71XX Infinity EMS Quick Start Guide - Manual (Page 38)

36
© 2014 AEM Performance Electronics
Infinity Quick Start Guide
Steps
Set TPS Volts Min
Press this button when the throttle pedal is fully released. This will write the current value of
Analog7 [V] to the Throttle_raw [%] Analog In conditioner and display the resultant value on
the TPS Min Volts: X.XX display.
Set TPS Volts Max
Press this button after the throttle pedal is fully depresses. This will write the current value of
Analog7 [V] to the Throttle_raw [%] Analog In conditioner and display the resultant value on
the TPS Max Volts: X.XX display.