AEM 25-201BK Universal High Volume Fuel Filter User Manual
Page 3
AEM Performance Electronics
2205 126
th
Street Unit A Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-294
2011 Advanced Engine Management, Inc.
Exploded View of the filter assembly:
Installation notes:
END CAP THREAD = -10 AN O-Ring Seal or 7/8-14 SAE Thread
FUEL INLET = End Cap of the filter with the stainless steel compression spring.
FUEL OUTLET = End Cap of the filter with sealing gasket.
FUEL FILTER ELEMENT ORIENTATION = The fuel filter element is designed with two end
caps. One with a discharge hole and the other end is capped off.
CAPPED OFF
= Towards compression spring/Fuel inlet. Labeled “Hose End”
DISCHARGE HOLE
= Towards sealing gasket/fuel outlet. Labeled “Nozzle End”
ALWAYS lubricate the o-rings before re-installing the end caps onto the filter body.
For Technical Inquiries
Please E-Mail us at