AEM 30-2067 X-WiFi Wideband UEGO & EGT Controller - Manual (Page 11)

Page 11
To view the advanced configuration screen, open the hyper terminal communication,
but do not connect. Plug the USB cable into the pc/laptop. Press and hold
configuration button 1. With configuration button 1 depressed, plug the USB cable into
the X-WIFI and continue to hold configuration button 1 for two seconds, then release.
Click the connect button on the hyper terminal communication. The advanced
configuration screen will appear as shown below in Figure 10.
Consult your router documentation for the necessary network settings.
FIGURE 9. HYPER TERMINAL SETTINGS
FIGURE 10. ADVANCED WIFI CONFIGURATION