AEM 30-6040 Series 2 Plug & Play EMS User Manual
Page 10
Advertising
Page 10 of 11
30-1040 (Series 1) vs 30-6040 (Series 2) OBD1 Honda EMS pin differences:
The EMS functions assigned to certain pins have been changed and no longer match the
30-1040 EMS. Unless otherwise noted, the following pins and functions will need to be
manually reconfigured after using AEMTuner to convert a V1.19 (30-1100, Series 1 EMS)
calibration for use with the 30-6100 Series 2 hardware.
Pin
OBD1 Honda / Acura
30-1040 function
30-6040 function Notes
A22
Ignition Control Module
---
CAN1L
B4
---
Coil #5
Coil 4
Copy settings for Ign Phasing,
knock feedback, cylinder ign trim
C2
---
---
CAN1H
D4
Service Check Connector
Knock #2
Injector 9
Knock 2 not available
Advertising