Apple Workgroup Server 8150/110 - Manual (Page 27)

Turning the server on
Before turning the server on, make sure it is in its upright position; the
Workgroup Server 8150 is not designed to run on its side.
To turn on the server for the first time, follow these steps.
1 Turn on the monitor.
See the information that came with your monitor for the location of the power
switch. On Apple monitors, the power switch has this icon:
I.
Note: You only need to turn on the monitor once if it is plugged into the
server. From now on, the monitor will turn off automatically when you shut
down the server, and it will turn on automatically when you start up the server.
(If the monitor is not plugged into the server, it must be turned on separately
each time you turn on the server.)
2 Turn on all external devices.
External devices may include hard disk drives, CD-ROM drives, or tape-backup
drives. The server checks only once—at startup—for the presence of external
devices, so you need to turn on the devices before you turn on the server.
3 Turn on your server by pressing the Power On key.
You’ll find the Power On key at the top of the keyboard. You can recognize
this key by the triangle outline.
Turning the server on 11