Apple Workgroup Server 8150/110 - Manual (Page 38)

Connecting to a LocalTalk network
The Apple LocalTalk Locking Connector Kit DIN-8, available from your
Apple-authorized dealer, lets you connect the server to an existing LocalTalk
network by means of the printer port.
To connect the server to a LocalTalk network:
1 Make sure that the server is turned off.
2 Attach the LocalTalk adapter to the printer port.
3 Plug one end of a LocalTalk cable into the LocalTalk adapter.
4 Plug the other end of the cable into the last LocalTalk adapter on the network.
Now that you have made the server’s physical connection to LocalTalk, you
can start up the server.
Printer port
LocalTalk adapter
LocalTalk cable
Printer port icon
Printer port
22 Chapter 2 / Connecting to the Network