Apple Logic Express 7 - Manual (Page 443)

Chapter 16 The Transform Window 443
Min
Parameter values lower than the set value are replaced by it. Larger parameter values
remain unaltered.
Max
Parameter values that exceed the set value are replaced by it. Smaller parameter values
remain unaltered.
Flip
The parameter values are reversed around a set point. Values above this amount are
moved to the same distance below it and vice versa.
Mul
The parameter value is multiplied by the set value (4 decimal places).
Div
The parameter value is divided by the set value (4 decimal places).
Scale
The parameter value is multiplied by the top value, and the bottom value is then
added. This is a combination of Mul and Add. Negative values can be used to generate
an inversion of the plus/minus sign, and subtraction, rather than addition.
Range
Parameter values outside the set value range are replaced by the values of the (range)
“limits” (combination of Min and Max).
Random
Random values are generated within the set limits.
+—Rand.
A random value between zero and the set value (positive or negative) is added.
Reverse
The parameter value is reversed within its value range (no value can be set here).
Quantize
The parameter value is quantized to a multiple of the set value.
Qua & Min
Like Quantize, but the quantization does not fall below the set value (a combination of
the Quantize & Min functions, with the same set value).