Apple Logic Express 7 - Manual (Page 74)

74 Chapter 2 Transport
Position display, Locators (see “Position Display” on page 76)
Tempo and Time Signature display (see “Tempo/Free Memory” on page 77)
MIDI Input—Output/Song End (see “MIDI Monitor/Song End” on page 78)
Note: As a floating window, the Transport window is always in the foreground, and can
not be covered by other (non-floating) windows.
All display fields in the Transport window (apart from the song name) can be used for
data input. You can either: double-click on the desired display field and input the
numbers with the keyboard, or adjust the individual numbers by using the mouse as a
slider.
Note: All Transport functions are also available as preset (but also user-definable)
keyboard commands, even if the Transport window is not open.
To open the Transport window:
m Select Windows > Transport, or press Command-7.
Note: Logic allows an unlimited number of Transport windows to be simultaneously
opened. Additional Transport windows can be used as giant displays for the Bar or
SMPTE position, as examples.
To close the Transport window
m Click the close button at the top left of the Transport window.
Note: The bar that contains the close/open and minimize buttons is normally found at
the top of most windows. In the Transport window, this bar is located to the left.
To reposition the Transport window onscreen:
m Grab anywhere in the gray area of the Transport window (not on a function or field),
and drag it to the desired position.