Apple Newton Internet Enabler - Manual (Page 9)

7 In the third setup slip, enter the login script (provided by your ISP) and the
timeout delay:
See the next section for instructions on setting up a login script.
Note: If your ISP uses PAP or CHAP (password authentication), you probably won’t
need a login script—the “Done” command will be the only item in the script.
9
Tap Done to select commands for the login script
provided by your ISP. (The next section shows the list
of commands and gives instructions for entering the
login script.)
Tap here to set a
timeout value. (This
value is used at login
time—if any step in
the login script takes
longer than the
timeout value, the
login operation will
be canceled.)
Tap here when you’re through filling out this slip and
entering the login script.
Tap Go Back if you need to
return to the previous slip.