Apple Soundtrack Pro - Manual (Page 134)

134 Chapter 6 Working in the Mixer
Removing Channel Strips
You can remove a channel strip from the Mixer if you decide you no longer want it in
the project.
To remove a channel strip:
1 Select the channel strip.
2 Choose Multitrack > Remove [item].
The term indicated by [item] changes in the menu depending on whether a track, bus,
or output is selected.
Note: If audio from a track is sent to a bus or output, and you remove the bus or
output, the audio from the track will not be heard when you play the project.
Working With Effects and Sends in the Mixer
You can add effects to a channel strip in the Mixer, show effects settings, turn effects
on and off, replace an effect, and delete effects. You can also adjust effects settings in
the Effects tab or in the effect’s advanced settings window.
Adding Effects to a Channel Strip
You can add effects, turn effects off and on, and reorder effects in a channel strip.
Note: Before adding an effect to a track, its a good idea to solo the track so that you
can hear how the effect changes its sound, separate from the other tracks in the
project.
To add an effect to a channel strip:
m Control-click an empty effects slot in the channel strip, choose Add Effect from the
shortcut menu, then choose one of the available effects from the categories in the
submenu.