Configuring the mpeg-1 file format for web use, P. 122) – Apple Compressor 2 User Manual
Page 122
122
Chapter 9
Creating MPEG-1 Output Files
Configuring the MPEG-1 File Format for Web Use
The following steps guide you through configuring the MPEG-1 output file format for
web use. This process creates a single MPEG-1 system stream.
Step 1:
Open the MPEG-1 Encoder pane and choose Video settings
1
Open the Settings tab of the Presets window, then choose MPEG-1 from the “Create a
New Setting” ( + ) pop-up menu.
The MPEG-1 Encoder pane opens in the Inspector with the default Video tab displayed.
2
Select the Enabled box.
3
Choose Automatic from the “Frame rate” pop-up menu.
You can also choose 23.976, 29.97, or 25 if you know the frame rate of the source video.
4
Select the Web button.
This sets the resolution of the output to 320 x 240.
5
Choose the bit rate to use from the “Bit rate” slider, or enter a value directly.
Select to enable the
Video tab.
Choose the frame rate.
Select Web to set the
resolution to 320 x 240.
Choose the bit rate.