Apple AppleShare IP 5.0 Update - Manual (Page 21)

The AppleShare IP servers use several files located in the System Folder of
your startup disk. If you change your startup disk after you install any of the
AppleShare IP server programs, you need to install AppleShare IP on the new
startup disk and copy certain files and folders from the old startup disk to the
new startup disk.
This appendix provides instructions for two scenarios:
m adding a new disk, making it the startup disk, and keeping the old disk
m replacing the startup disk
Depending on whether you add or replace a startup disk and on which
AppleShare IP servers your computer is running, you may skip some of the
steps shown in this appendix.
To change the startup disk, follow these steps:
1 Shut down your computer and connect the hard disk you want to use as the startup disk.
See the manual that came with your computer for detailed instructions.
2 Restart your computer.
3 Make sure that the new hard disk has a name that is different from the startup disk.
4 Install System 7.6, Open Transport 1.1.2, and AppleShare IP software on the new
hard disk.
For information about installing this software, see Chapter 1.
Appendix D Changing the Startup Disk