Apple Xsan 1.1 - Manual (Page 111)

Appendix B Using the Command Line 111
repquota Generate the following quota report files in
/Library/Filesystems/Xsan/data/<vol> :
quota_report.txt – text file
quota_report.csv – comma-delimited file
quota_regen.in – cvadmin commands that will set
up identical quotas on another controller. You can use
cvadmin -f to execute the commands.
repof Create a report of open files on the active volume in
the file
/Library/Filesystems/Xsan/data
/<volume>/open_file_report.txt .
select [volume] Choose the “active” volume that you want to work
with. The name of the currently active volume appears
following the command prompt in interactive mode,
for example:
Xsanadmin (Vol1) > .
To see a list of running volumes, leave off the volume
parameter.
volume – the name of an Xsan volume
show [pool] [long] List storage pool information for the active volume.
start volume [on] [controller] Start the volume based on the information in its
configuration file (
/Library/Filesystems
/Xsan/config/volume.cfg ).
controller – The address of the controller to start
the volume’s FSM process on.
stat Display information about the active volume.
stop volume Stop the active volume and its FSM process.
up pool Allow access to the specified storage pool.
who Display client information for the active volume.
cvadmin command Description