Apple Xsan 1.1 - Manual (Page 75)

Chapter 4 Managing Clients and Users 75
Removing a Client From a SAN
You can remove a client computer from a SAN to prevent it from accessing SAN
volumes.
To remove a client from a SAN:
m Physically disconnect the client computer from the SAN’s Ethernet and Fibre Channel
networks or remove the Xsan software from the client.
Removing Xsan Software From a Computer
If you’re no longer using a computer on a SAN, you can remove the Xsan software from
the computer.
To uninstall the Xsan software:
1 Unmount any volumes mounted on the computer.
Open Xsan Admin, select the volume, and click Clients. Then select the client computer
and click Unmount.
2 Insert the Xsan installer disc and double-click Uninstall_Xsan.pkg.
After the software is removed, you can reuse the software and associated serial number
on another computer.