Apple Xserve Intel (Late 2006) DIY Procedure for Logic Board - Manual (Page 25)

Xserve (Late 2006) Logic Board Replacement Instructions 5
Using the Updated Server Serial Number
When you use Server Assistant to install Mac OS X Server on an Xserve remotely, you need to
enter a password consisting of the first eight digits of the Xserve hardware serial number. After
you replace the logic board, the original serial number is no longer valid. Instead, use the serial
number 12345678.
For more information about the serial number and installing Mac OS X Server remotely, see
“Mac OS X Server Getting Started” on the Admin Tools disc that comes with the Xserve, and also
available at www.apple.com/server/documentation.
 Apple Computer, Inc.
© 2006 Apple Computer, Inc. All rights reserved.
Under the copyright laws, this document may not be copied, in whole or in part, without the
written consent of Apple.
Every effort has been made to ensure that the information in this document is accurate. Apple is
not responsible for printing or clerical errors.
Apple
1 Infinite Loop
Cupertino, CA 95014-2084
USA
+ 1 408 996 1010
http://www.apple.com
Apple, the Apple logo, Mac, Macintosh, and Xserve are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.