Apple Shake 4 Tutorials User Manual
Page 159
Tutorial 4
Working With Expressions
159
•
Set xAngle to –7.5.
•
Set yAngle to –25.
•
Set zAngle to –195.
•
Leave center (x, y) at 80.
The result looks similar to this:
To animate the X element:
1
In the Move3D parameters, click the zAngle Autokey button to set a keyframe.
2
Go to frame 5.
3
Set the zAngle parameter to –122.
4
Use the Left Arrow and Right Arrow keys to step through the animation.
The animation matches between frames 1 and 5, but stops at frame 5. Use the Curve
Editor to correct the problem.
Note: When Autokey is enabled, the Load Curve button is activated, so the zAngle
curve is already loaded into the Curve Editor.
5
Click the Curve Editor tab.
6
To select the curve, drag across the curve or select the curve in the curve list.
7
In the Curve Editor, change the curve Cycle mode from KeepValue (default) to
KeepSlope.